Fueltankstatus

FuelTankStatus (UORB message)

source file

```c uint64 timestamp # time since system start (microseconds)

float32 maximum_fuel_capacity # maximum fuel capacity. Must always be provided, either from the driver or a parameter float32 consumed_fuel # consumed fuel, NaN if not measured. Should not be inferred from the max fuel capacity float32 fuel_consumption_rate # fuel consumption rate, NaN if not measured

uint8 percent_remaining # percentage of remaining fuel, UINT8_MAX if not provided float32 remaining_fuel # remaining fuel, NaN if not measured. Should not be inferred from the max fuel capacity

uint8 fuel_tank_id # identifier for the fuel tank. Must match ID of other messages for same fuel system. 0 by default when only a single tank exists

uint32 fuel_type # type of fuel based on MAV_FUEL_TYPE enum. Set to MAV_FUEL_TYPE_UNKNOWN if unknown or it does not fit the provided types uint8 MAV_FUEL_TYPE_UNKNOWN = 0 # fuel type not specified. Fuel levels are normalized (i.e., maximum is 1, and other levels are relative to 1). uint8 MAV_FUEL_TYPE_LIQUID = 1 # represents generic liquid fuels, such as gasoline or diesel. Fuel levels are measured in millilitres (ml), and flow rates in millilitres per second (ml/s). uint8 MAV_FUEL_TYPE_GAS = 2 # represents a gas fuel, such as hydrogen, methane, or propane. Fuel levels are in kilo-Pascal (kPa), and flow rates are in milliliters per second (ml/s).

float32 temperature # fuel temperature in Kelvin, NaN if not measured

```