Gps Smartap

Sky-Drones SmartAP GPS

SmartAP GPS is a GNSS navigation module with integrated antenna, UBlox Neo-M8N chipset, 3x 3-axis magnetometer (compass), 1x MS-5611 pressure sensor and RGB LED driver. SmartAP GPS supports concurrent reception of up to 3 GNSS (GPS, Galileo, GLONASS, BeiDou).

Key features include: - Concurrent reception of up to 3 GNSS (GPS, Galileo, GLONASS, BeiDou) - 3x built-in magnetometers: HMC5983, IST8310 and LIS3MDL - 1x built-in barometer: MS5611 - RGB LED Driver and status LEDs

Where to Buy

• Sky-Drones Store

Kit Contents

An SmartAP GPS kit includes: - 1x GPS modules - 1x 30cm cable

Configuration

For the aircraft, you should set the parameter SER_GPS1_BAUD to 115200 8N1 to ensure that PX4 uses the correct baudrate.

Pinout and Connections

SmartAP GPS has 10 pin JST-GH connector that can be plugged into a Pixhawk flight controller (compliant with Pixhawk connector standard).

Pin number | Pin name ---|--- 1 | 5V 2 | USART1_RX 3 | USART1_TX 4 | I2C1_SCL 5 | I2C1_SDA 6 | SAFETY_BTN 7 | SAFETY_LED 8 | +3V3 9 | BUZZER 10 | GND

Specification

• U-blox M8N GPS Receiver
• IST8310 Magnetometer
• HMC5983 Magnetometer
• LIS3MDL Magnetometer
• MS5611 Pressure sensor
• RGB LEDs for status indication
• NCP5623 I2C Driver
• Diameter: 75mm
• Weight: 34g

Further Information

• Buy SmartAP GPS
• Documentation
• CAD Models