Gps Cuav Neo 3

CUAV NEO 3 GPS

This NEO 3 GPS is manufactured by CUAV. It integrates Ublox M9N, IST8310, three-color LED lights and safety switches, and is compatible with CUAV and Pixhawk standard controllers.

Technical Specification

| Hardware | Type | | :------------------------------------------------ | :----------------------------------------------------------------------------- | | Compass | IST8310 | | GNSS receiver | UBLOX NEO M9N | | RGB drive | NC5623C | | Buzzer | Passive buzzer | | Safety switch | Physical button | | GNSS | Beidou, Galileo, GLONASS, GPS | | GNSS Augmentation System | SBAS:WAAS,EGNOS,MSAS
QZSS:L1s(SAIF)
other：RTCM3.3 | | Number of concurrent GNSS | 4 | | Frequency band | GPS:L1C/A
GLONASS:L10F
Beidou:B1I
Galileo:E1B/C | | Horizontal accuracy | 2.0M | | Speed accuracy | 0.05M/S | | Nav. update rate | 25Hz(Max) | | Acquisition | Cold start：24S
Hot start：2S
Aided start:2s | | Number of satellites(MAX) | 32+ | | Sensitivity | Tracking and nav-167dBm
Cold start Hot star-148dBm
Reacquisition -160dBm | | Protocol | UART+IO+I2C | | Port TYpe | GHR-10V-S | | Supported flight controller | CUAV series,
Pixahwk series | | Wave filtering | SAW+LNA+SAW | | Anti-Electromagnetic/radio frequency interference | EMI+RFI | | Upgrade firmware | support | | Input voltage | 5V | | Operating temperature | -10~70℃ | | Size | 60*60*16MM | | Weight | 33g |

Dimensions

Pinouts

Where to Buy

• CUAV

Wiring and Connections

Neo3 wiring and connection diagram

More info

• CUAV docs