Modules Driver Transponder

Modules Reference: Transponder (Driver)

sagetech_mxs

Source: drivers/transponder/sagetech_mxs

### Description

This driver integrates the Sagetech MXS Certified Transponder to send and receive ADSB messages and traffic.

### Examples

Attempt to start driver on a specified serial device.
$ sagetech_mxs start -d /dev/ttyS1
Stop driver
$ sagetech_mxs stop
Set Flight ID (8 char max)
$ sagetech_mxs flight_id MXS12345
Set MXS Operating Mode
$ sagetech_mxs opmode off/on/stby/alt
$ sagetech_mxs opmode 0/1/2/3
Set the Squawk Code
$ sagetech_mxs squawk 1200

Usage

``` sagetech_mxs [arguments...] Commands: start Start driver -d Serial device

stop Stop driver

flightid Set Flight ID (8 char max)

ident Set the IDENT bit in ADSB-Out messages

opmode Set the MXS operating mode. ('off', 'on', 'stby', 'alt', or numerical [0-3])

squawk Set the Squawk Code. [0-7777] Octal (no digit larger than 7) ```