Skip to main content

Modules Driver Baro

Raffaele Rossi

Modules Reference: Baro (Driver)

bmp280

Source: drivers/barometer/bmp280

Usage

``` bmp280 [arguments...] Commands: start [-I] Internal I2C bus(es) [-X] External I2C bus(es) [-s] Internal SPI bus(es) [-S] External SPI bus(es) [-b ] board-specific bus (default=all) (external SPI: n-th bus (default=1)) [-c ] chip-select pin (for internal SPI) or index (for external SPI) [-m ] SPI mode [-f ] bus frequency in kHz [-q] quiet startup (no message if no device found) [-a ] I2C address default: 118 [-s] Internal SPI bus(es) [-S] External SPI bus(es) [-b ] board-specific bus (default=all) (external SPI: n-th bus (default=1)) [-c ] chip-select pin (for internal SPI) or index (for external SPI) [-m ] SPI mode [-f ] bus frequency in kHz [-q] quiet startup (no message if no device found)

stop

status print status info ```

bmp388

Source: drivers/barometer/bmp388

Usage

``` bmp388 [arguments...] Commands: start [-I] Internal I2C bus(es) [-X] External I2C bus(es) [-s] Internal SPI bus(es) [-S] External SPI bus(es) [-b ] board-specific bus (default=all) (external SPI: n-th bus (default=1)) [-c ] chip-select pin (for internal SPI) or index (for external SPI) [-m ] SPI mode [-f ] bus frequency in kHz [-q] quiet startup (no message if no device found) [-a ] I2C address default: 118

stop

status print status info ```

bmp581

Source: drivers/barometer/bmp581

Usage

``` bmp581 [arguments...] Commands: start [-I] Internal I2C bus(es) [-X] External I2C bus(es) [-s] Internal SPI bus(es) [-S] External SPI bus(es) [-b ] board-specific bus (default=all) (external SPI: n-th bus (default=1)) [-c ] chip-select pin (for internal SPI) or index (for external SPI) [-m ] SPI mode [-f ] bus frequency in kHz [-q] quiet startup (no message if no device found) [-a ] I2C address default: 70

stop

status print status info ```

dps310

Source: drivers/barometer/dps310

Usage

``` dps310 [arguments...] Commands: start [-I] Internal I2C bus(es) [-X] External I2C bus(es) [-s] Internal SPI bus(es) [-S] External SPI bus(es) [-b ] board-specific bus (default=all) (external SPI: n-th bus (default=1)) [-c ] chip-select pin (for internal SPI) or index (for external SPI) [-m ] SPI mode [-f ] bus frequency in kHz [-q] quiet startup (no message if no device found) [-a ] I2C address default: 119 [-s] Internal SPI bus(es) [-S] External SPI bus(es) [-b ] board-specific bus (default=all) (external SPI: n-th bus (default=1)) [-c ] chip-select pin (for internal SPI) or index (for external SPI) [-m ] SPI mode [-f ] bus frequency in kHz [-q] quiet startup (no message if no device found)

stop

status print status info ```

icp101xx

Source: drivers/barometer/invensense/icp101xx

Usage

``` icp101xx [arguments...] Commands: start [-I] Internal I2C bus(es) [-X] External I2C bus(es) [-b ] board-specific bus (default=all) (external SPI: n-th bus (default=1)) [-f ] bus frequency in kHz [-q] quiet startup (no message if no device found) [-a ] I2C address default: 99

stop

status print status info ```

icp201xx

Source: drivers/barometer/invensense/icp201xx

Usage

``` icp201xx [arguments...] Commands: start [-I] Internal I2C bus(es) [-X] External I2C bus(es) [-b ] board-specific bus (default=all) (external SPI: n-th bus (default=1)) [-f ] bus frequency in kHz [-q] quiet startup (no message if no device found) [-a ] I2C address default: 99

stop

status print status info ```

lps22hb

Source: drivers/barometer/lps22hb

Usage

``` lps22hb [arguments...] Commands: start [-I] Internal I2C bus(es) [-X] External I2C bus(es) [-s] Internal SPI bus(es) [-S] External SPI bus(es) [-b ] board-specific bus (default=all) (external SPI: n-th bus (default=1)) [-c ] chip-select pin (for internal SPI) or index (for external SPI) [-m ] SPI mode [-f ] bus frequency in kHz [-q] quiet startup (no message if no device found)

stop

status print status info ```

lps25h

Source: drivers/barometer/lps25h

Usage

``` lps25h [arguments...] Commands: start [-I] Internal I2C bus(es) [-X] External I2C bus(es) [-s] Internal SPI bus(es) [-S] External SPI bus(es) [-b ] board-specific bus (default=all) (external SPI: n-th bus (default=1)) [-c ] chip-select pin (for internal SPI) or index (for external SPI) [-m ] SPI mode [-f ] bus frequency in kHz [-q] quiet startup (no message if no device found)

stop

status print status info ```

lps33hw

Source: drivers/barometer/lps33hw

Usage

``` lps33hw [arguments...] Commands: start [-I] Internal I2C bus(es) [-X] External I2C bus(es) [-s] Internal SPI bus(es) [-S] External SPI bus(es) [-b ] board-specific bus (default=all) (external SPI: n-th bus (default=1)) [-c ] chip-select pin (for internal SPI) or index (for external SPI) [-m ] SPI mode [-f ] bus frequency in kHz [-q] quiet startup (no message if no device found) [-a ] I2C address default: 93 [-k] if initialization (probing) fails, keep retrying periodically

stop

status print status info ```

mpc2520

Source: drivers/barometer/maiertek/mpc2520

Usage

``` mpc2520 [arguments...] Commands: start [-I] Internal I2C bus(es) [-X] External I2C bus(es) [-b ] board-specific bus (default=all) (external SPI: n-th bus (default=1)) [-f ] bus frequency in kHz [-q] quiet startup (no message if no device found) [-a ] I2C address default: 118

stop

status print status info ```

mpl3115a2

Source: drivers/barometer/mpl3115a2

Usage

``` mpl3115a2 [arguments...] Commands: start [-I] Internal I2C bus(es) [-X] External I2C bus(es) [-b ] board-specific bus (default=all) (external SPI: n-th bus (default=1)) [-f ] bus frequency in kHz [-q] quiet startup (no message if no device found) [-a ] I2C address default: 96

stop

status print status info ```

ms5611

Source: drivers/barometer/ms5611

Usage

``` ms5611 [arguments...] Commands: start [-I] Internal I2C bus(es) [-X] External I2C bus(es) [-s] Internal SPI bus(es) [-S] External SPI bus(es) [-b ] board-specific bus (default=all) (external SPI: n-th bus (default=1)) [-c ] chip-select pin (for internal SPI) or index (for external SPI) [-m ] SPI mode [-f ] bus frequency in kHz [-q] quiet startup (no message if no device found) [-s] Internal SPI bus(es) [-S] External SPI bus(es) [-b ] board-specific bus (default=all) (external SPI: n-th bus (default=1)) [-c ] chip-select pin (for internal SPI) or index (for external SPI) [-m ] SPI mode [-f ] bus frequency in kHz [-q] quiet startup (no message if no device found) [-T ] Device type values: 5607|5611, default: 5611

stop

status print status info ```

ms5837

Source: drivers/barometer/ms5837

Usage

``` ms5837 [arguments...] Commands: start [-I] Internal I2C bus(es) [-X] External I2C bus(es) [-b ] board-specific bus (default=all) (external SPI: n-th bus (default=1)) [-f ] bus frequency in kHz [-q] quiet startup (no message if no device found)

stop

status print status info ```

spl06

Source: drivers/barometer/goertek/spl06

Usage

``` spl06 [arguments...] Commands: start [-I] Internal I2C bus(es) [-X] External I2C bus(es) [-s] Internal SPI bus(es) [-S] External SPI bus(es) [-b ] board-specific bus (default=all) (external SPI: n-th bus (default=1)) [-c ] chip-select pin (for internal SPI) or index (for external SPI) [-m ] SPI mode [-f ] bus frequency in kHz [-q] quiet startup (no message if no device found) [-a ] I2C address default: 118 [-s] Internal SPI bus(es) [-S] External SPI bus(es) [-b ] board-specific bus (default=all) (external SPI: n-th bus (default=1)) [-c ] chip-select pin (for internal SPI) or index (for external SPI) [-m ] SPI mode [-f ] bus frequency in kHz [-q] quiet startup (no message if no device found)

stop

status print status info ```

Comments

0 comments

Please sign in to leave a comment.