Gps Cuav Neo 3X

CUAV NEO 3X GPS

CUAV Neo 3X is a GNSS receiver that is waterproof and dustproof. It has IP66 protection capability and integrates UBLOX M9N module, RM3100 compass, color LED light and safety switch.

Main features :

• Professional waterproof and dustproof design.
• DroneCAN protocol support.
• Quad Satellite System Receiver (Ublox M9N).

Technical Specification

| Hardware | Type | | :------------------------ | :-------------------------------------------------------------------------------- | | MUC | STM32F412 | | Protocol | DroneCAN | | Compass | RM3100 | | Barometer | ICP-20100 | | GNSS receiver | Ublox M9N | | Frequency band | GPS: L1C/A
GLONASS:L10F
Beidou:B1I
Galileo:E1B/C | | Number of concurrent GNSS | 4 | | Horizontal accuracy | 1.5m | | Number of satellites(MAX) | 32+ | | Acquisition | Cold start：24S
Hot start：2S
Aided start:2s | | Nav. update rate | 5Hz(default)，25Hz(MAX) | | Sensitivity | Tracking and nav:-167dBm
Cold start Hot star:-148dBm
Reacquisition: -160dBm | | Protection level | IP66 | | Input voltage | 4.7~5.2V | | Operating temperature | -10~70℃ | | Size | 676721.2mm | | Weight | 46g (without cable） |

Where to Buy

• CUAV

Wiring and Connections

NEO 3X connected to autopilot CAN1/CAN2 interface

PX4 Configuration

Open QGroundControl > Parameters and modify the following parameters:

• UAVCAN_ENABLESet to Sensors Automatic config .
• UAVCAN_SUB_GPS Set to Enable.

More info

• CUAV docs