Modules Estimator

Modules Reference: Estimator

AttitudeEstimatorQ

Source: modules/attitude_estimator_q

Description

Attitude estimator q.

Usage

``` AttitudeEstimatorQ [arguments...] Commands: start

stop

status print status info ```

airspeed_estimator

Source: modules/airspeed_selector

Description

This module provides a single airspeed_validated topic, containing indicated (IAS), calibrated (CAS), true airspeed (TAS) and the information if the estimation currently is invalid and if based sensor readings or on groundspeed minus windspeed. Supporting the input of multiple "raw" airspeed inputs, this module automatically switches to a valid sensor in case of failure detection. For failure detection as well as for the estimation of a scale factor from IAS to CAS, it runs several wind estimators and also publishes those.

Usage

``` airspeed_estimator [arguments...] Commands: start

stop

status print status info ```

ekf2

Source: modules/ekf2

Description

Attitude and position estimator using an Extended Kalman Filter. It is used for Multirotors and Fixed-Wing.

The documentation can be found on the ECL/EKF Overview & Tuning page.

ekf2 can be started in replay mode (-r): in this mode, it does not access the system time, but only uses the timestamps from the sensor topics.

Usage

``` ekf2 [arguments...] Commands: start [-r] Enable replay mode

stop

status print status info [-v] verbose (print all states and full covariance matrix)

select_instance Request switch to new estimator instance Specify desired estimator instance ```

local_position_estimator

Source: modules/local_position_estimator

Description

Attitude and position estimator using an Extended Kalman Filter.

Usage

``` local_position_estimator [arguments...] Commands: start

stop

status print status info ```

mc_hover_thrust_estimator

Source: modules/mc_hover_thrust_estimator

Description

Usage

``` mc_hover_thrust_estimator [arguments...] Commands: start

stop

status print status info ```